Concrete Sealers

WL550

WL550 Matte Wet Look Sealer For Concrete, Brick, Stone, And Masonry

Matte Wet Look Sealer For Concrete, Brick, Stone, And Masonry


The Armor WL550 is a solvent based water repellent sealer that penetrates deep into concrete and masonry surfaces where it chemically reacts and fuses with the substrate to form a hydrophobic barrier within the pores. Surfaces sealed with the Armor WL550 are more resistant to the damaging effects of water absorption and salt damage. The Armor WL550 also works to slightly darken the color of the concrete or masonry, giving it a matte, wet look finish.

Benefits:

  • Will enhance dull and faded surfaces with a matte wet look

  • Works entirely below the surface and won’t leave a surface film

  • Reduces surface water absorption

  • Reduces damage and deterioration caused by water absorption

  • Reduces damage and deterioration caused by snow and ice

  • Reduces the growth of mold, mildew, and algae

    Technical Data Sheet | Safety Data Sheet

WL550 Matte Wet Look Sealer For Concrete, Brick, Stone, And Masonry
WL550 Matte Wet Look Sealer For Concrete, Brick, Stone, And Masonry

  • The Armor WL550 is designed for use on unsealed surface, including:

    • Poured and broom finished concrete

    • Exposed aggregate concrete

    • Concrete pavers

    • Brick pavers

    • Red clay brick

    • Flagstone

    • Natural stone

    The Armor WL550 can be used on a variety of applications, including:

    • Driveways, walkways, and pool decks

    • Brick and natural stone enhancements on homes and buildings

    • Curbing around gardens and walkways

    • Retaining walls

    • More!

  • The Armor WL550 is designed to work entirely below the surface and will not leave a visible surface film. It will slightly darken the surface in order to provide a matte wet look. For a more dramatic color enhancement, or to achieve a low gloss or high gloss finish, consider instead the Armor AR350 for a low gloss wet look, or the Armor AR500 for a high gloss wet look.

    Color enhancement will vary depending on several factors including surface porosity. We suggest applying a sample of the Armor WL550 first to verify you are able to achieve the desired look.

  • When properly applied, the Armor WL550 can provide up to 3-5 years of life on an exterior surface before the need to recoat.

    While the Armor WL550 is designed to out-last and out-perform similar products on the market, there are several factors that can impact actual product life, including the severity of surface abrasion and level of foot traffic, the porosity of the concrete or pavers, and other factors. Some surfaces need to be sealed every year, while others can go a few years without sealing.

    Water Bead: Surface water beading will not occur on all surfaces. While some surfaces may experience an instantaneous bead, others won’t experience a surface water bead at all. Surface water beading is not a sealer benefit. Surface water bead is caused from resin build-up in the surface pores. Once the resin build-up goes away, so will the bead. The Armor WL550 is designed to work entirely below the surface so its benefits are made visible through performance. You will find sealed surfaces dry faster, are easier to clean, and experience less damage caused by freeze-thaw cycles and de-icing salts.

Request for a qoute now!