Concrete Sealers

AR500

AR500 Solvent-Based High Gloss Wet Look Pure Acrylic Concrete And Paver Sealer

Solvent-Based High Gloss Wet Look Pure Acrylic Concrete And Paver Sealer

The Armor AR500 is a solvent based pure acrylic sealer designed to enhance and protect concrete and concrete pavers with a high gloss wet look.

  • Will enhance dull and faded surfaces with a high gloss wet look

  • Will reduce damage and deterioration caused by water absorption

  • Will reduce damage and deterioration caused by surface abrasion

  • Easy to apply with a roller or sprayer to concrete and concrete pavers

  • Will reduce the growth of mold, mildew, and algae

  • UV resistant, non-yellowing, breathable

    Technical Data Sheet | Safety Data Sheet

AR500 Solvent-Based High Gloss Wet Look Pure Acrylic Concrete And Paver Sealer
AR500 Solvent-Based High Gloss Wet Look Pure Acrylic Concrete And Paver Sealer

  • The Armor AR500 is a great choice for a variety of interior and exterior concrete applications, including:

    • Pool decks and patios

    • Driveways, walkways, and stairs

    • Carports and pole barn floors

    • Much more!

    The AR500 can be applied to a variety of interior and exterior concrete surfaces, including:

    • Stamped concrete

    • Poured and broom finished concrete

    • Exposed aggregate concrete

    • Concrete pavers

    The Armor AR500 is designed specifically to be used on unsealed concrete and concrete pavers. It can also be applied to concrete and concrete paver surfaces previously sealed with a solvent based acrylic. The Armor AR500 should not be used to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone. If you are looking to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone, consider instead of the Armor WL550 or the Armor SX5000 WB.

    The Armor AR500 can’t be applied over any other film forming sealer, other than a solvent-based acrylic sealer. It can’t be applied over a water based acrylic, an acrylic latex, a paint, epoxy, or urethane.

  • The Armor AR500 ships in clear and offers a high gloss finish. Armor Opaque Acrylic Color Packs can be added for a tinted opaque high gloss finish, and Armor Semi-Transparent Acrylic Color Packs can be added for a tinted semi-transparent high gloss finish.

    The actual level of gloss and enhancement received will depend on the type and age of the surface, age, porosity, condition, applicator, application method, and amount of material applied. For an accurate representation of what your surface will look like once sealed, we suggest applying the product to a test area first.

  • When properly applied, the Armor AR500 can provide up to 1-3 years of life on an exterior surface before the need to recoat, and up to 2-7 years of life on an interior surface.

    While the Armor AR500 is designed to out-last and out-perform similar products on the market, there are several factors that can impact actual product life including the severity of surface abrasion and level of foot traffic, the porosity of the concrete or pavers, and the amount of resin build-up on the surface. Some surfaces need to be sealed every year, while others can go a few years without sealing.

Request for a qoute now!